Hello brettandrew, I'm ThatOneMushroomGuy and I'll be the TA handling your critique today.

Arrows

Starting with your arrows your lines are looking fairly confident and smooth, which helps communicate a nice sense of fluidity in your arrows as they move through the world. You're keeping foreshorting in mind while constructing your arrows which allows you to make really good use of perspective and the depth of your page, this gives a good extra layer of tridimensionality to your arrows.

Your usage of hatching helps you establish how your arrows twist and turn in space and further your own understanding of the tridimensional space these objects occupy, but do remember that your hatching lines must still follow the principles of ghosting and mark-making, they must have clear end and start points, be carefully planned and executed and not end at arbitrary points.

It's good that you're making use of added line weight on top of the overlaps in order to reinforce their depth, but don't forget that it must be added subtly to your work, only once, on top of the overlaps, and the ends of the lines must taper seamlessly into the lines underneath.

You've done a good job on this exercise, what I'd like to tell you so that can keep getting the most out of this exercise is actually to encourage you to get out of your comfort zone more often the next time you tackle this exercise, try arrows with different kinds of twists and turns and different rates of foreshortening, keep in mind that arrows are very flexible objects and can move freely across the world in all sorts of manners, so you should push yourself and explore the different possibilities.

Leaves

The linework for your leaves is looking smooth which helps communicate their fluidity and sense of energy, it's good that you're not only trying to capture how these structures sit statically within space, but also how they move across it from moment to moment.

It's good to see that you've experimented with complex leaf structures but remember not to skip construction steps when approaching these more intricate structures.

These structures are looser than they could be, because you did not establish the spatial boundary that all of the later structures should abide to, despite complex structures being made up of several different parts, they still exist as a single entity, by not skipping construction steps you can ensure that your constructions are much more solid and specific.

And for this structure, you're also skipping construction steps, due to the nature of this course and how it teaches certain skills it's fundamental that we're always making use of the construction techniques and methods we learn to our constructions.

But certain structures are just way too complicated and it's not feasible to draw them with the methods introduced, it is simply impossible to fully draw each individual leaf structure or branch structure in a plant such as this one while still following the instructions for this exercise, as such avoid picking trees, bushes, or small leaves that are too complex and similar structures as a subject to study in this lesson.

Branches

Moving on to your branches they are coming along really decently made as you're generally following the instructions for the exercise, but they can still be improved. While it's good to see that you're drawing your edges in segments you're not always extending said segment completely up to the halfway point between ellipses, which partially removes the healthy overlaps we seek to achieve in these structures.

So remember how branches should be approached, by having your segment start at the first ellipse point, extending it past the second ellipse and fully up to the halfway point to the third ellipse, afterwards you'll start a new segment, making sure to place your pen at the second ellipse and repeat this pattern until your entire branch is complete.

For ellipses it's good to see that you're making an attempt to always draw through them twice, as that allows for a smoother mark overall. It's good to see that you're aware of the ellipse degree shift and making use of it in your constructions, which helps these structures feel more solid and believably tridimensional.

Plant Construction Section

And lastly let's take a look at your plant constructions, which are generally coming along well made, as you're following the construction methods and techniques introduced in the lesson which allows you to construct really solid looking and believably tridimensional structures. I can see a good developing sense of spatial reasoning in these pages.

However there are some issues present in these pages which are holding you back from your full potential. So here are the points you should keep in mind whenever you tackle these exercises again so that you can continue to develop your skills.

First things first, an issue that hurts your work without you even realizing is the fact that you're pre-planning the amount of constructions you want to fit on a given page before you've even committed to any of them. Drawing bigger would allow you not only more room to work through the spatial reasoning challenges that arise when tackling these exercises, but also give you enough space to fully engage your whole arm.

You're also often grinding certain structures, especially since you submitted more pages than were requested. This is still considered grinding and you should avoid it, trying the same kind of structures over and over again is not particularly helpful if you do not get feedback in between attempts, this only ensures that you're only going to be making the same mistakes over and over again and getting diminishing returns every attempt, so as per lesson 0, complete only the work that is assigned, as it is assigned, and do not deviate in any way from what is asked.

Always keep in mind that the construction methods and techniques introduced in this course must always be applied to your work, as they're tools which will help you construct much tighter and solid looking structures, there are times where you deviate from the construction methods by not starting your branches with a minor axis or keeping your leaf structures simple. Remember that they're not guidelines or suggestions - they are rules.

Make sure that you're always drawing through your forms and constructing them fully, I've noticed that in some of your constructions you don't draw through some of your forms, such as leaves or branch like structures, this limits your ability to work through these tridimensional puzzles and limits how much you're getting out of the exercise. Not drawing through your forms means relying on your observation skills, instead of engaging your sense of spatial reasoning and truly trying to understand how the object you're drawing works, where it comes from, what it attaches to.

When approaching cylindrical structures such as plant pots make sure to start with a minor axis in order to keep your several ellipses aligned to each other more easily. Going further don't forget to construct the outer rim that's present in most types of plant pots, and make sure to add a ground plane to your structures, this line is necessary when constructing plant pots because otherwise your structure will look like it's floating in mind air, which breaks the illusion of the construction.

And lastly, let's take a look at your textures, where your textures are starting to move in the right direction, but they do still lean towards the explicit side since for the most part you attempt to capture texture with thin marks, random dots, or big areas of black to capture local color.

So remember that in Drawabox, texture isn’t about making your work look pretty or aesthetic. Instead, it’s about accurately representing what’s physically present in your reference. The goal is to understand how each form exists in 3D space and how it casts shadows on surfaces. By analyzing the reference closely, you'll be able to translate it into your construction.

The shape of the shadow is important because it shows the relationship between the form and the surface it’s on. We need to think carefully about how to design a shadow shape that feels dynamic and communicates 3D space effectively. It’s harder than just focusing on making your work look nice, but this method will help you strengthen your spatial reasoning skills. This also means that by considering the tridimensionality of the form we must consider the transitions from light to dark that your texture would have as the form shifts away in space and if affected differently by the light.

As shown in this diagram, depending on how far the form is from the light source, the angle of the light rays will hit the object at shallower angles the farther away they are, resulting in the shadow itself being projected farther. This gives us the logical grounds to say that despite two forms being identical, they don't have to cast identical shadows - and therefore we can control where we want shadows to be longer or shorter, without changing the nature of the texture being conveyed.

By following this approach, you’ll focus on conveying texture more efficiently, using fewer lines and less ink, while sticking to the mark-making techniques from Lesson 2. Take some time to review the reminders to solidify your understanding of texture.

Final Thoughts

In general your work is moving in the right direction, you're starting to understand the concepts this lesson seeks to teach, but you're still struggling with several points, as such I'll be asking you for a couple of revisions before marking this submission as complete, so you can revisit these concepts before moving on to a more complex lesson.

Please reply once you've finished rereading the relevant lesson material with:

1 page, half of leaves, half of branches.

2 plant construction pages.