Lesson 2: Contour Lines, Texture and Construction

10:16 PM, Wednesday July 28th 2021

Lesson 2: Contour Lines, Texture and Construction - Google Drive

Lesson 2: Contour Lines, Texture and Construction - Google Drive: https://drive.google.com/drive/folders/1-1xOJyQGGw5yISyj8IBtoHcwy9ZQF8pt

width=device-width,initial-scale=1,minimum-scale=1,maximum-scale=3,user-...

Hi

This second lesson was very difficult for me. I think I've fried my brain. Especially with the analysis of textures and dissections, in many moments I felt that I was getting lost in the texture and had to stop shortly after starting, which has made me progress very slowly. In short: it has been very, very, very hard. But I did it, it has taken me almost two months, but I am finally done, and I am looking forward to receiving feedback. Thanks in advance.

Cheers!

0 users agree
11:54 AM, Saturday July 31st 2021

Hi, I'll be the TA handling your Lesson 2 critique.

You're making progress towards understanding the concepts introduced in this lesson and hopefully this critique will help you in your future attempts.

  • Starting off in the arrows section your lines are looking smoothly and confidently drawn. There are spots where your arrows bulge/narrow suddenly, this is an issue because it gives the impression that your arrows are stretching which hurts their solidity. Remember that as our arrows move closer to the viewer we want them to widen consistently. This is a good exercise to experiment with line weight but when applying it we want to make sure we do subtly to key areas like overlaps to give clarity to our forms. Here are some things to look out for when applying line weight, and here are some reminders on how to apply it subtly. I'd like you to experiment more with foreshortening in your future attempts, by utilizing it in both the arrows themselves as well as the negative space between their curves we can create a stronger illusion of an object moving through 3D space as demonstrated here.

  • Moving into the organic forms with contours exercise your forms are getting a bit too complex. We want to create our forms with both ends being the same size and to avoid any pinching, bloating, or stretching along the form's length as discussed here. You're keeping your line work confident here which is great, if you feel uncomfortable working with contours still don't stress with more mileage it'll become more natural. Speaking of contours I'd like you to try and shift the degree of your contours more. The degree of a contour line basically represents the orientation of that cross-section in space, relative to the viewer, and as we slide along the sausage form, the cross section is either going to open up (allowing us to see more of it) or turn away from the viewer (allowing us to see less), as shown here.

  • In the texture exercises you're focusing largely on outlines and negative space rather than cast shadows created by forms along the texture itself. This makes it difficult to create gradients with implied information which we could then use to create focal points in more complex pieces, by doing so we can prevent our viewers from being visually overwhelmed with too much detail. For more on the importance of focusing on cast shadows read here. I'd also like to quickly direct you to this image which shows that when we're working with thin line like textures if we outline and fill the shadow we will create a much more dynamic texture than simply drawing lines.

  • It's quite common for people to feel like they don't fully grasp the form intersections exercise, if you feel like you may fall into this category try not to stress too much. This exercise is just meant to get students to start thinking about how their forms relate to one another in 3D space, and how to define those relationships on the page. We'll be going over them more in the upcoming lessons. Your forms are looking quite solid here and they believably appear to belong in the same cohesive 3D space, good work you're on the right track.

  • While wrapping up your submission with the organic intersections exercise you show that you need a bit more time becoming comfortable with thinking of how these forms interact in 3D space and how they'd wrap around one another. I recommend trying to stack your forms perpendicularly rather than trying to keep them headed in the same direction to help make wrapping them around one another a smoother task. You're keeping your forms relatively simple and easy to work with which is a good strategy to help produce good results. In the future I'd like you to draw through all of your forms as it helps deepen our understanding of the 3D space we're attempting to create. When it comes to your shadows you're pushing them enough so that they cast rather than just hugging the form that creates them which is a great start. It appears like your shadows aren't following a consistent light source, I recommend pushing your light source to the top left or right corner of the page to start with, it's easier than working with a light directly above your form pile.

Overall this was a solid submission, while you may have some things to work on I have no doubt you will improve with more mileage. I'll be marking your submission as complete and moving you on to the next lesson.

Keep practicing previous exercises as warm ups and good luck in lesson 3!

Next Steps:

Keep practicing previous exercise as warm ups.

Move on to lesson 3.

This critique marks this lesson as complete.
12:39 AM, Tuesday August 3rd 2021

Gracias !

The recommendation below is an advertisement. Most of the links here are part of Amazon's affiliate program (unless otherwise stated), which helps support this website. It's also more than that - it's a hand-picked recommendation of something I've used myself. If you're interested, here is a full list.
Ellipse Master Template

Ellipse Master Template

This recommendation is really just for those of you who've reached lesson 6 and onwards.

I haven't found the actual brand you buy to matter much, so you may want to shop around. This one is a "master" template, which will give you a broad range of ellipse degrees and sizes (this one ranges between 0.25 inches and 1.5 inches), and is a good place to start. You may end up finding that this range limits the kinds of ellipses you draw, forcing you to work within those bounds, but it may still be worth it as full sets of ellipse guides can run you quite a bit more, simply due to the sizes and degrees that need to be covered.

No matter which brand of ellipse guide you decide to pick up, make sure they have little markings for the minor axes.

This website uses cookies. You can read more about what we do with them, read our privacy policy.